The mounting systems shown on this page have been assembled as pre-configured packages to simplify the selection of all of the necessary components needed to support your KDS equipment. All of the individual components are also available separately.
These pre-configured mounting system packages are only a small sample of the many options we have available. Contact the PQS sales team if you need a custom mounting system designed specifically for your application.
Currently we do not offer pre-configured packages for Counter Top, Under Counter, Ceiling or Pole mounting as more than 90% of all KDS screens are are supported by shelf edge mounts.
However, we do have an excellent selection of individual components for Counter Top, Under Counter, Ceiling or Pole mounting. These individual components are available on our website.
Please visit our website www.practicalqualitysystems.com and/or contact the PQS sales team if you need a custom mounting system designed specifically for your application
Kitchen Display Systems
An easy to understand tutorial
KDS Counter Top Mounts
If space allows, screens can be located directly on a counter top. This is most often done on the expo side of pass through areas that have plenty of space. Usually a cable path hole is installed near the rear of the counter top behind the screen. The power and data outlets are ideally located completely out of sight inside a cabinet below the counter top.
A good KDS counter top mount should be movable and have an integral VESA pan and tilt head that adjusts and locks easily without tools.
In some cases screens can be supported by pedestal mounts that have an integral VESA pan and tilt head and are permanently attached to the counter top. If this type of mount is used, extra care should be taken to identify the optimum mount location BEFORE securing the mount to the counter top.
KDS Under Counter Mounts
Under counter mounts are particularly useful where the counter top is made of a premium material such as stone or glass.
Some mounts that are attached to the underside of a counter top support the screen from the edge of the counter top at a fixed tilted position.
Some mounts that are attached to the underside of a counter top include an integral VESA pan and tilt head attached to the end
of an articulating arm. The arm can be locked in any desired position and allow the screen to swing in an arc to float above the
counter top.